Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Pegasus SHK-FORD-001-BLACK, Silicone Hose Kit, compatible with Ford F150 5.0 / EcoBoost Reservoir, Black
This product ad may change over time
SharePegasus SHK-FORD-001-BLACK, Silicone Hose Kit, compatible with Ford F150 5.0 / EcoBoost Reservoir, Black
Users say:
This product is a great solution for Ford coolant reservoir leaks, but it can be difficult to install. It is important to boil the hose to soften it up and to use gloves and a grinding wheel to get it on. The customer service is also not great, as they don't seem to be very helpful.
Contains all of the parts you need to replace the stock coolant reservoir hose with a reliable clamped connection. Replace the leaky, unreliable quick-disconnect elbow on the bottom of your 2011-16 Ford F-150 coolant reservoir! This hose is part of the pressurized cooling system, but the clip-retained hose often leaks where it meets the reservoir. …
Contains all of the parts you need to replace the stock coolant reservoir hose with a reliable clamped connection. Replace the leaky, unreliable quick-disconnect elbow on the bottom of your 2011-16 Ford F-150 coolant reservoir! This hose is part of the pressurized cooling system, but the clip-retained hose often leaks where it meets the reservoir. Our repair kit replaces the stock hose with a more reliable clamped connection. Kit contents: 1x RE9025.19-Black Silicone Elbow, 1" to 3/4" 90 Degree Reducer 1x HJ19 Aluminum Hose Joiner, 3/4" 2x 3613-1.25 Lined Hose Clamps for 3/4" End 2x 3613-1.75 Lined Hose Clamps for 1" End To install: Remove the stock clip-retained hose from the reservoir and from the lower hose. Install the aluminum joiner in the lower hose and secure with one small hose clamp. Slide the small end of the reducing elbow onto the aluminum joiner, securing with one small hose clamp. Slide the large end of the reducing elbow over the nipple on the coolant reservoir. Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot. The hose should very nearly touch the reservoir body. This is critical to prevent the hose from coming off under pressure. Install one large hose clamp on the reducing elbow below the clip slot. This clamp will create the liquid-tight seal. Install the second large hose clamp on the reducing elbow above the clip slot. This clamp will keep the hose in place. Installation usually takes less than 2 hours. This kit fits the fender-mounted reservoir tank on 2011-16 Ford F-150 with 5.0L V8, 3.7L V6, or 3.5L V6 EcoBoost engines; and 2015-17 Ford Expedition / Lincoln Navigator with the 3.5L V6 EcoBoost engine. Does not fit the 4.6L, 5.4L, or 6.2L V8 engines. Does not fit the radiator-mounted "towing package" reservoir without modifying the reservoir. Click the link below for a printable copy of the installation instructions, including before and after photos! F150 Reservoir Silicone Hose Kit Instructions
Review summary
AI-generated content
This product is a great solution for Ford coolant reservoir leaks, but it can be difficult to install. It is important to boil the hose to soften it up and to use gloves and a grinding wheel to get it on. The customer service is also not great, as they don't seem to be very helpful.
Pros
- Easy to install
- Fixes leaks
- Comes with necessary tools
- Good value for money
Cons
- Poor engineering
- Small hose end
Description
Contains all of the parts you need to replace the stock coolant reservoir hose with a reliable clamped connection. Replace the leaky, unreliable quick-disconnect elbow on the bottom of your 2011-16 Ford F-150 coolant reservoir! This hose is part of the pressurized cooling system, but the clip-retained hose often leaks where it meets the reservoir. Our repair kit replaces the stock hose with a more reliable clamped connection. Kit contents: 1x RE9025.19-Black Silicone Elbow, 1" to 3/4" 90 Degree Reducer 1x HJ19 Aluminum Hose Joiner, 3/4" 2x 3613-1.25 Lined Hose Clamps for 3/4" End 2x 3613-1.75 Lined Hose Clamps for 1" End To install: Remove the stock clip-retained hose from the reservoir and from the lower hose. Install the aluminum joiner in the lower hose and secure with one small hose clamp. Slide the small end of the reducing elbow onto the aluminum joiner, securing with one small hose clamp. Slide the large end of the reducing elbow over the nipple on the coolant reservoir. Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot. The hose should very nearly touch the reservoir body. This is critical to prevent the hose from coming off under pressure. Install one large hose clamp on the reducing elbow below the clip slot. This clamp will create the liquid-tight seal. Install the second large hose clamp on the reducing elbow above the clip slot. This clamp will keep the hose in place. Installation usually takes less than 2 hours. This kit fits the fender-mounted reservoir tank on 2011-16 Ford F-150 with 5.0L V8, 3.7L V6, or 3.5L V6 EcoBoost engines; and 2015-17 Ford Expedition / Lincoln Navigator with the 3.5L V6 EcoBoost engine. Does not fit the 4.6L, 5.4L, or 6.2L V8 engines. Does not fit the radiator-mounted "towing package" reservoir without modifying the reservoir. Click the link below for a printable copy of the installation instructions, including before and after photos! F150 Reservoir Silicone Hose Kit Instructions
Feedback